Thank you for your purchase of a MMS1 modular set up. The module is seldom purchased by itself
and as a result it is normally shipped together with a pulley set up. So this manual will cover an
example set up that most likely will be close to what you have purchased.
1. Delivery
It is your responsibility to inspect all packaging for damage. Observable damage should be noted
prior to signing the bill of lading. Damage claims will be denied by the carrier if the signed copy
of receipt does not state anything about damage. Please contact RehabPro, Inc. or your local dealer
immediately with any damage concerns.
2. Shipment
Your order is most likely ship as shown to
the left. Each pulley is packaged in a
separate box. The two heaviest pulleys are
on the bottom and they are bolted to the
wood skid. The upper two are banded to the
skid. Mounting hardware, the modular
upright and other ordered accessories are
inside the boxes. Please confirm your order
with the attached packing slip. Cut the bands
and unpack one pulley at a time. Look for
additional accessories in each box.
3. Overview & Assembly
The System Completed
The system set up will look similar to the 3 example pictures shown above, the lat pull being on
one side and the speed pulley on the opposite side to counterweigh the lat pull. The remaining two
sides hold the remaining pulleys or one pulley and a ladder.