15
HD balance
Diagram 29.
Mounting
of the fixed-angle legrests.
Diagram 30.
Fixed-angle
legrests in place.
Diagram 31.
Folding up
the footplate.
Diagram 32.
Foot and
calf supports.
FIXED-ANGLE LEGREST
Alternatively, the wheelchair can be equipped with fixed-angle
legrests that can be designed at different angles.
MOUNTING FIXED-ANGLE LEGRESTS
- Align the hole in the knee joint over the peg on the bracket and
let the knee joint slide down, see Diagram 29. It may be easier if
the lever (1) is moved forward.
- Release the lever (1) and rotate the legrest so that it points
straight ahead, make sure that the locking pin clicks in and locks
the knee joint (Diagram 30).
REMOVAL/ANGLING OF FIXED-ANGLE LEGRESTS
- Grip the legrest and move the lever (1) forwards.
- Turn out/lift off the legrest.
AMPUTEE LEGREST
For information about use and mounting of the amputee legrest,
see separate User manual/Assembly instructions.
3.13 Footrest
FOLD-UP FOOTPLATE
Footplates can be folded up to the side, to facilitate entry and
exit, see Diagram 31.
HEIGHT SETTING FOOT REST
Press the snap lock, (2) in Diagram 32, and move the footrest
tube to the desired position.
ANGLE SETTING FOOTRESTS
- Loosen the lock nut (3), see Diagram 32.
- Tilt the foot plate to the desired position.
- Tighten the lock nut securely
Tools can be found under the seat.
3.14 Calf support
DEPTH SETTING OF CALF SUPPORT
- Loosen the lock nut (4) a few turns, see Diagram 32.
- Slide the calf plate to the desired position.
- Tighten the screw.
Tools can be found under the seat.
HEIGHT ADJUSTMENT CALF SUPPORT
The height of the calf support is adjustable along the legrest tube.
Loosen the knob (5) in Diagram 32, then pull the calf support to
the desired position and tighten the knob.
1
2
3
5
4
1
