14
HD balance
Diagram 25.
Angling of legrest.
Diagram 27.
Removal of legrest.
Diagram 28.
Mounting legrest.
Diagram 26.
Slewing of legrest.
Diagram 24.
3.12 Legrest
ANGLE ADJUSTABLE LEGREST
Angle adjustable legrests are standard on the HD Balance. They
can be angled between 90 ° (straight down) and 180 ° (straight
ahead) with 10 ° steps (10 positions).
Components see Diagram 24:
1 Locking button for removal of legrests
2 Angle control, release button
3 Legrest tube
4 Plastic housing, outside
5 Padding, inside
6 Knee joint
7 Turnable link
8 Snap lock, footrest
ANGLING OF LEGRESTS, DIAGRAM 25
1 Grip the legrest tube (3 in Diagram 25), as far down as possible.
Lift slightly to lighten the load on the locking mechanism.
2 Push button (2 in Diagram 25) on the outside of the knee joint
and move the legrest into the desired position.
3 Release the button and move the legrest in either direction so
that leg angle mechanism snaps into the locked position.
TURN OUT LEGRESTS, DIAGRAM 26
The legrests can be angled out by about 90 degrees for better
access in and out of the chair. In order to angle them out, grip
the knee joint from above and push in the lock button.
REMOVAL OF LEGRESTS, DIAGRAM 27
1 Grip the knee joint (6) from above and press in the lock button (1).
2/3. Lift straight up until the legrest is loose. Thereafter, the legrest
can be lifted out without the user’s legs needing to be stretched.
Alternatively, the legrest can first be turned outwards and then
lifted off.
MOUNTING LEGREST, DIAGRAM 28
- Grip around the knee joint from above and press in the control button.
- Move the knee joint just above the bracket on the wheelchair.
- Align the hole with the peg on the bracket and slide it down.
- Turn the knee joint so that it points straight ahead and ensure
that the locking pin clicks in.
2
1
3
8
4
5
6
7
1
2
3
1
2
3
1
2
1
2
