│
4
RTC 13e - www.regulus.eu
- A damaged power cable may only be replaced by an authorized service organization.
- Do not remove the protective covers of the device. Operation is only permitted when
all protective covers are fitted.
- Do not interfere with the refrigerant circuit or electrical wiring.
- It is forbidden to touch the equipment barefoot or with wet body parts.
1.3. Instructions for maintenance, repair and servicing
- Service work on the equipment must be carried out by professional and qualified
personnel. The user is authorized to perform only the visual inspection and user
maintenance specified in this manual.
- Wear personal protective equipment (goggles, gloves, etc.) when working on the
equipment.
- Ensure that the heat pump is switched off before any intervention. It is forbidden to
carry out maintenance or cleaning when the equipment is live.
- Before starting work on the equipment, make sure that the necessary conditions for
working with flammable refrigerants have been ensured.
- Refrigerant topping up can only be carried out in cooling mode.
- It is forbidden to top up refrigerant other than R32.
- Some parts of the equipment (e.g. the compressor and its outlet pipes) may be very
hot even after stopping operation.
- Never disassemble casing, covers, etc. that are bolted together.
- Never disable safety features of the equipment.
- It is forbidden to tamper with or replace any parts of the equipment without the
express permission of the manufacturer.
If the instructions in this manual are not followed, the manufacturer does not feel
bound by the terms of the warranty or liable for damages.
