Regulus CSE SOL G SRS1 T-E, Installation And Operation Manual

Page: 6 / 12

6. Installation Options
The solar pump station is designed to be mounted on a wall or on a tank. There are two fixing ope-
nings in the rear part of the insulation. The lower one is accessible only when the electronic contro-
ller is removed from rear part of the insulation (see the pic. below).
The supply involves an installation kit that is used to fix the pump station in its place.
7. Pump Station Connection Diagram
OPENINGS IN THE BACK
PLATE FOR FIXING THE
PUMP STATION
SRS1 T
CONTROLLER
KEY
1 hot water storage tank
2 ETT-N electric heating element
3 solar collectors
4 solar pump station
5 pump station for DHW recirculation – CSE
TVMIX ZV
6 safety kit for HW storage tank
7 solar expansion vessel
8 DHW expansion vessel
SV cold water
TV hot water
CV hot water recirculation
KK ball valve
ZV check valve
AOV automatic air vent valve
PTR pressure temperature relief valve
REDV pressure reducing valve (optional)
VK drain valve
SVE expansion vessel service valve
ZÁS power socket, 230 VAC, 50 Hz
S1 collector temperature sensor Pt1000
S2 HW storage tank temperature sensor Pt1000
R1 R1 relay of SRS1 T controller (potential-free)