RA-MINI ALU
IN-LINE ACTUATOR SERIES
6
04. Warranty
All REGNER® products have a warranty against
manufacturing defects. The warranty period begins
on the purchase date of the product. The seller is
responsible for nonconformities that become appar-
ent within the time stipulated by the applicable law.
04.01. Warranty Exclusions
REGNER® is entitled to deny any warranty if:
• The actuator has not been used correctly or its
usage specifications (load, temperature, duty cycle,
voltage, current, etc.) have not been respected.
• The actuator has not been maintained correctly.
• The actuator has been manipulated.
• The actuator has been exposed to violent or abra-
sive treatment.
Nonconformities due to reasonable wear and tear
of the actuator over time (such as faded paint) are
excluded from warranty.
REGNER® reserves the right to request the return
of all allegedly defective products for testing and
verification.
Any additional warranty obligations for parts
replaced free of charge or for any service provided
without charge under this warranty shall be exclud-
ed. The warranty period for parts replaced under
warranty will end on the expiry date of the warranty
period of the main product.
05.
Specifications
05.01. Label
Batch No: XXXXXX
Customer Ref.: XXXXX
RA-MINI ALU 45.30.87.350.D4
www.regner.es
01. RA-MINI ALU 45.30.87.350.D4
• RA-MINI ALU: actuator type
• 45: max. load (N)
• 30: stroke length (mm)
• 87: retracted length, center to center (mm)
• 350: cable length (mm)
• D: rod end (D = standard / H = clevis)
• 4: mounting hole diameter (mm)
• 0: Position control (0 = Limit switches only, P =
potentiometer).
02. Customer Ref.: XXXXXXX
Optional. Customer reference for the product.
03. Batch No.: XXXXXX
Identification number assigned to a particular lot
of products that enables REGNER® to control their
quality and trace their constituent parts.
04. Symbols
Symbol
Norms
WEEE Directive 2002/96/EC
Compliance to all relevant CE directives
