Regintech SkypeConf, User Manual

Page: 34 / 82

from 20 to 50Hz.
The default setting is 20Hz.
International busy tone setting & User
’s busy tone parameter setting
User can choose the living country from country selection list to get the familiar
busy tone. When user can’t find the living country from the list, user can
configure the busy tone parameters themselves if they know the appropriate
setting. Then click OK. It is not necessary for user to change this setting for
general application.
This feature also allows user to set the appropriate settings of busy tone when
SkypeConf is connected with one PBX for different application. By selecting a
country, the device will activate the specific busy tone frequency and cycle
adopted by local Public Switched Telephone Networks in that country.
Sometimes, the connecting PBX doesn't have the exact busy tone parameter as
defined in user's country. For this case, user might encounter busy tone
detection and unfamiliar busy tone problems even selecting user's country. User
can configure the busy tone parameters themselves if they know the appropriate
setting. Enable user's busy tone parameter setting option as below figure and fill
in appropriate parameters, then click OK. The parameter will be saved and
active.
The default international busy tone country setting is decided by the “Select
Setup
Language” selection when SkypeConf is installed. For example, when
user selects English, the default country will be United States. SkypeConf
supports busy tone for most countries now.