Regency U31-10 Gas Fireplace Insert
|
21
|
21
installation
LOW PROFILE FACEPLATE INSTALLATION
1
02/16/15
919-524
U31
1)
Attach the inner f aceplate panel to the inser t body using 4 scre ws
in the locations sho wn below.
Diagram 1
Diagram 2
Diagram 3
Diagram 4
LO W PR OFILE FA CEPLA TE INST ALLA TION
2)
Connect the male end black and red f an switch wires to the wire
connectors from the f an speed control .
Diagram 5
Diagram 6
3) Tuck the wires into the clip to k eep them away from the inser t using
the clip pro vided. Attach the clip to the rear of the f aceplate to en-
sure that the wires do not touch the side of the unit. The po wer cord
should be r un behind the inner f aceplate panel .
4)
5) Feed wires through the left air chamber clip - then clip them it to
lower left of fi rebox as sho w below.
Wire
feed
6) Clip the r ight side air chamber clip as sho wn below in Diagram 7.
Diagram 7
Install the fan speed control box to the left hand bottom leg
of the inner faceplate. Controls located on the left side.
