HZ42ST Regency Horizon
TM
Gas Fireplace
36
INST
ALLA
TION
INSTALLATION
24)
Reconnect electrical supply - test lights.
25)
Reverse steps 8 -2.
23)
Attach ground wire to ground lug - and plug in light assembly.
Note: The receptacle can be mounted in 2 locations in the fi rebox.
(see below)
Receptacle
Ground Lug
Ground Lug
Receptacle can also
be mounted on this side
Vent Side of Unit
Top View - fl oor of unit
4)
Remove one screw securing the socket end of the diffuser and
separate the 2 parts - as shown below.
3)
Pull out light diffuser.
BULB REPLACEMENT
1)
Slide out bottom faceplate panel - see step 3 from previous page.
2)
Remove 4 screws securing light diffuser mounting plate.
6)
Reverse steps 3 through 1.
5)
Replace bulb.
Note
: Oils from hands will shorten the life of the bulbs,
do not handle bulbs with bare hands.
21)
Repeat steps 12-20 to install the 3 remaining light diffusers .
22)
After all light diffusers are installed - manage wiring so that it is
neatly arranged and out of the way - as shown below.
20)
Secure socket to light diffuser with one screw - as shown below.
