HZ42ST Regency Horizon
TM
Gas Fireplace
40
INST
ALLA
TION
FACEPLATE INSTALLATION
INSTALLATION
1)
Hook the fl ange on the back of the faceplate over the top edge of
the glass door - as shown below.
2)
The height at which the faceplate sits may be adjusted to maintain
an even space between the upper faceplate and
lower faceplate panel.
The upper faceplate can be raised up once the
lower faceplate panel is in position - by adjusting the 2 screws
at the back of the upper faceplate - see below
(requires an extended phillips head screw driver)
The bottom panel of the faceplate installs on the unit with 2 slides.
These slides are located in the bottom of the unit - already installed
within the outer slide. The inner slides need to be removed to install
them on the brackets.
6)
Position the faceplate bracket and slide under the
mounting plate.
The mounting plate is located on the inside lower
edge of the faceplate panel.
Glass Door
Faceplate
Inner Slide
Backside of Faceplate Panel
Mounting Plate on Faceplate
Bracket
Inner Slide
3)
Pull out inner slide from the outer slide.
4)
Push done on the black lever on the outside of the inner slide - this will
release the inner slide. Pull inner slide out - from outer slide.
5)
Install the fi rst inner slide to the faceplate bracket with 2 screws as
shown below.
Note:
Brackets are shipped with the unit - not the faceplate.
