HZ42 Regency Horizon
TM
Gas Fireplace
49
MAINTENANCE
MAINTENANCE
11)
Remove the valve tray by undoing the 14 outer screws.
Note:
Some of the screws are not visible in Diagram below.
Note:
If optional accent lights have been installed - assure all wiring is out
of the way before removing valve assembly.
12)
Partially lift out valve tray.
9)
Disconnect the ignitor wire at DC sparker..
Ignitor Wire
Gas Line
13)
Disconnect the inlet gas line and remove the valve assembly.
14)
Replace valve assembly and reverse steps.
4)
Remove one screw securing the socket end of the diffuser and
separate the 2 parts - as shown below.
3)
Pull out light diffuser.
BULB REPLACEMENT
1)
Slide out bottom faceplate panel.
2)
Remove 4 screws securing light diffuser mounting plate - see below.
6)
Reverse steps 3 through 1..
5)
Replace bulb.
Note
: Oils from hands will shorten the life of the bulbs,
do not handle bulbs with bare hands.
