Regency FireGenie PG121-LPG1 Owners & Installation Manual Download

Page: 44 / 44

Printed in Canada

Installer: Please complete the following information

Dealer Name & Address: ______________________________________________

___________________________________________________________________

Installer: ___________________________________________________________

Phone #: ___________________________________________________________

Date Installed: ______________________________________________________

Serial No.: __________________________________________________________

Register your Regency

warranty online

www.regency-fi re.com.au

Reasons to register your product online today!

• View and modify a list of all your registered products.

• Request automatic email notifi cation of new product updates.

• Stay informed about the current promotions, events, and special

offers on related products.

• Help assure you get the most out of your warranty.

• Eliminate confusion and frustration if warranty** service is required in

the future.

** Proof of purchase required at time of warranty request.

Summary of Contents for FireGenie PG121-LPG1













































Search results

Summary of Contents for FireGenie PG121-LPG1

Reviews:

Related manuals for FireGenie PG121-LPG1

Brands by name

Popular brands

Regency FireGenie PG121-LPG1, Owners & Installation Manual

Search results

Summary of Contents for FireGenie PG121-LPG1

Reviews:

Related manuals for FireGenie PG121-LPG1

Brands by name

Popular brands