Regency Ultimate™ U900E-11 Gas Fireplace
|
51
installation
919-220
11/13/15
2
GF900
GLASS SURROUND INSTALLATION
Install the fascia to the unit by hooking the left and right side mounting brackets into the mounting slots at the side of the fi rebox as shown
below. It is recommended that you use the fi rst mounting slot (the one closest to the door frame overlay) out of the 3 so that the faceplate
and door frame overlay are fl ush with one another. See diagram below.
NOTE: There are 3 mounting slots available, this is to accommodate any fi nishing that protrudes slightly beyond the faceplate.
Warning:
Turn off the unit by way of the wall switch or remote.
Allow unit to cool at least 10 min. - prior to removing the
faceplate.
Diagram 1 - Glass Surround Install
Diagram 3- Final Install
Diagram 2 - adjustments
+1/4" (6mm)
+1/2" (13mm)
Use fi rst notch in bracket
for standard installation
919-615
11.05.15
GF900/GF1500L
919-615
11.05.15
1
OPTIONAL FINISHING TRIM INSTALLATION
tooltip
tooltip
1.
Install the optional finishing trim by lining up trim with the outside of
the fascia. Press trim inward firmly to seat onto the unit.
Note:
magnets will keep the trim in place.
2.
Pull trim outward–away from the unit to remove.
Finishing Trim Installed
OPTIONAL FINISHING TRIM INSTALLATION
tooltip
tooltip
1.
Install the optional finishing trim by lining up trim with the outside of
the fascia. Press trim inward firmly to seat onto the unit.
Note:
magnets will keep the trim in place.
2.
Pull trim outward–away from the unit to remove.
Finishing Trim Installed
1
GF900/GF1500L
OPTIONAL FINISHING TRIM INSTALLATION
GLASS SURROUND INSTALLATION
