52
FPI P36-4 Zero Clearance Direct Vent Gas Fireplace
REGENCY
®
OPTIONS
FLUSH LOUVERS
1)
Install the top louver by sliding the two
bracket clips into the brackets located
underneath the top of the fi rebox.
2)
The bottom louver has a hinge that is
attached (2 screws per hinge) to the lip on
bottom of the unit.
3)
Open the bottom louver. Pull the Burner
ON/OFF control box from inside the bottom
of the fi replace and position the slots in the
bracket over the 2 screws on the left side of
the bottom louver. Push down to lock into
place. Tighten the screws.
Burner ON/OFF
control box
Screws on
louver bracket
Note: Top and
bottom louvers
are different.
