CI2700/HI500 | wood insert |
25
25
|
installation
919-411
09/15/14
Back view of Top Fascia Panel lining up with the
brackets on Side Panels
7.
Apply self adhesive gasket to protect enamel surfaces from chipping.
Lift the top fascia panel up (use care as it is heavy) and slide down into
the brackets installed on Step 1.
Note:
If installing optional cast grill - follow installation instructions in the
manual.
Completed Optional Hampton
Oversize Cast Faceplate
8.
Re-install bypass rod and ring
Rail System
Gasket
Self adhesive gasket
6.
Apply the fl at self adhesive gasket (not shown) to the face of the unit just
above the fan opening. Install the seal/cushion to line up with the top of
the slide out door. With the door in closed position,take the bottom fascia
and line up the wheels and rails with the rails on the unit. When lined up,
lift up and into the rail system and slide into position.
5.
Reinstall unit door (removed in Step 1),
attach the left and right side
rails to the back of the bottom fascia panel using four 7/16’’ bolts, slide
each rail upward before tightening. (Rails may need to be bent slightly
outward to get a good fi t).
Rail system secured w/bolts
2
CI2600/ HI400
