14
Regency Bellavista™ B41XT Gas Fireplace
INSTALLATION
FINISHING
Non-combustible
Material
J-style Trim
or metal corner bead
may be used to finish these
edges
Non-combustible
Material
Non-combustible
Material
Diagram 2
Diagram 1
IMPORTANT FINISHING DETAIL NOTE:
Before placing unit into
fi
nal position - it is important to know the total
thickness / height of
fi
nished hearth (tile, carpet, etc.) The base of the
fi
replace should be level or higher than the
fi
nished hearth height.
Diagram 3: Shown with optional Finishing Trim
Finishing material -
thicker than 1-1/4"
Important:
Finishing materials such as tile, river rock, etc,
must not
protrude beyond
the front facing fl anges the sides and top of the fi rebox opening.
Full Screen Doors Only:
If fi nishing with any material thicker than 1-1/4" - a 3/4" gap must be
maintained between the full screen doors and the fi nishing material.
This gap is necessary to facilitate the installation and removal of the full
screen doors.
Note:
All non-combustible facing material should butt up cleanly to the fl anges
around the fi rebox opening.
Rough edges will be visible from the front view with the fl ush louvers or
fl ush panels - if not using the optional fi nishing trim.
To maintain a clean fi nished edge - it is recommended to install the non-
combustible facing material with the fi nished edge against the fi replace
/ nailing strips.
Alternatively, you can use J Style Trim or Metal Corner Bead to cover
cut edges of the non-combustible facing material.
Diagram 5
Diagram 4
Full Screen
Door
3/4"
43
3
8
"
37
5
8
"
