Regal 2000 ES, Owner'S Manual

Page: 165 / 352

Systems
4-9
MAIN BREAKER-BATTERY PANEL
As part of the battery circuit
protection from the battery
to the helm or dash panel a
breaker is installed within
40” of the battery. If the
breaker would draw exces-
sive amperage it is possible it
could “blow”. At this point it
would need to be reset.
Always determine the rea-
son why the breaker blew
before resetting it.
To reset the breaker move
the lever from the “off ” po-
sition to the “on” position.
Th ese Buss brand breakers are ignition protected which means they
are sealed providing protection from spark sources. When replac-
ing breakers ensure they are marketed as being ignition protected
POSSIBLE BREAKER PROBLEMS/SOLUTIONS
1. It is possible that the main circuit breaker may trip from long-
term arcing and heat. Th
e breaker may need to be reset.
2. Breaker will not reset- Replace the breaker. Contact the nearest
Regal dealer for replacement parts.
3. Breaker continues to “trip”. Check the aff ected equipment to de-
termine if it is responsible for the excessive draw to trip the breaker.
If the equipment is determined to be within specifi cations check for
a “short” in the wiring circuit. Contact the nearest Regal dealer.