6
1.
COPY
This function allows you to make a DVD/CD copy. Before the use
of this function, ensure that the correct reading source and blank
discs are placed in the appropriate drive. The system will
automatically display how many blank discs are detected. When
the system is ready, press ENT to execute copy command.
2.
TEST
This function is the same as above, except it will not record to the
recordable disc. Allows for a simulation run.
3.
COPY & VERIFY
This function makes a copy and is followed by a Verification
process to automatically ensure data correctness.
4.
COPY &
COMPARE
This function makes a copy and is followed by a Comparison
process to ensure data correctness with the source disc.
5.
VERIFY
This function operation will check all master and copied discs’
readability to confirm that all of the copies are readable.
6.
COMPARE
This function makes a bit-by-bit Comparison between the Master
Reading Source and all the copied discs inside the writer trays.
7. SET BURN SPEED
This function allows you to set the duplication speed for three
different disc types (CDs, audio CDs, and DVDs).
8.
SELECT SOURCE
This function allows you to set the master reading source as
DVD/CDROM Drive or Hard Drive Disk.
9.
AUDIO TRACK
EDIT
Makes Audio Track Selections. Also allows you to combine audio
tracks from various CDs into a single customized audio CD.
9.1
Select & Copy
Track
Select the track you would like to copy.
9.2
Close Disc
Allows you to close the track editing session in order to make the
resulting disc playable.
9.3
Disc Info
Check the disc status such as available capacity.
10.
UTILITY
10.1
Pre-scan
Confirms whether the Master Source Disc can be properly
duplicated.
10.2
Quick Erase
Quick erase re-writable discs’ data.
10.3
Full Erase
Full erase re-writable discs’ data.
10.4
Eject All Disc
Ejects all discs in writer tray, including master source disc.
10.5
Disc Info.
Displays basic information such as disc type, data length, and
available space.
10.6
Drive Info.
Displays duplicator’s major component information, such as the
manufacturer, Writer or Reader model numbers and versions.
10.7
System Info.
Provides the duplicator’s information, such as the Controller model
number, Buffer memory capacity, and Firmware version.
10.8
Update BIOS
As manufacturer’s certified update CD is inserted, this feature
instantly updates duplicator’s software.
10.9
Copy Count
This utility keeps track of the number of disc that has been
successfully copied.
11.
SET UP
11.1
Power On Time
After the system power is turned on, the system warm up time can
be set from 5 sec to 255 sec.
11.2
Auto Start
This feature allows the duplicator to automatically execute
copying once disc are detected in the reader and writer trays. The
setting can be turned off or the amount of seconds can be set to
(1~99). To automatically execute, the operation mode has to be
set to COPY, TEST, VERIFY, COPMARE, COPY&VERIFY, or
COPY&COMPARE.
11.3
Startup Menu
Allows you to set which menu function will be shown first when the
duplicator first starts up.
11.4
Write Method
CD duplication mode can be selected among “DAO”, “SAO”, and
“TAO”. The default mode is “DAO,” which means Disc at Once
11.5
Button Beep
Toggles on/off whether you hear a beep as you press a button.
11.6
Skip Read Error
In the event of a reading error, this function will simply continue the
duplication process rather than halting the entire duplication
process.
11.7
Eject on Start
Allows you to choose whether the duplicator system will eject the
disc on startup.
11.8
Boot Password
Allows setting or changing the password at start up.
11.9 Setup Password
Allows setting or changing the password for Setup.
Menu Overview
