17
press ENT to select
11.12 CHG Bad Master
When enabled this option allows you to change the master disc at mid burn if an
error is detect during the burn.
press ENT
press
,
to toggle between Enable and Disable
press ENT to select
11.13 CD Overburn
When enabled this option allows certain CDs that have been over burned during its
creation to be copied.
press ENT
press
,
to toggle between Enable and Disable
press ENT to select
11.14 Clear All
Reset the operations back to manufacturer’s default settings.
press ENT , clear all settings made and return back to manufacturer’s default setting
press ENT to confirm or press ESC to cancel
press ESC to return to 11.14 Clear Setup
12. IMAGE MANAGER (For Duplicator with HDD Installed)
This function shows how to perform various Hard Drive related operations. The system
menu will not show this function if your duplicator does not have an HDD installed.
Please refer to 14. ABOUT HDD MANAGER to get more information about the special
function and advantages about this feature.
12.1 Select Image
This function shows how to select an Image file as a Source that can be copied to
discs. This function is required when a copy is made from your HDD to blank discs.
Please refer to 12.1.1 for instructions regarding how to make Hard Drive-to-Disc
Copies.
press ENT
press
,
to select and press to ENT confirm
12.1.1 Make Hard Drive-to-Disc Copies
Make sure Hard Drive is set to Master Reading Source. When it is finished, select the
image then HDD will automatically be set as the Reading Source.
[Setup]
14. Clear Setup
[Image Manager]
1. Select Image
[Select Image]
A001 DVD 4469M
[Setup]
12. CHG Bad Master
Change Master…
== > Disable
[Setup]
13. CD Overburn
[CD Overburn]
== > Disable
Clear Parameter
To Default ?
All Parameter
Was cleared
