English Instruction Manual DIGIMON-SE / DIGIMON4
16
Resetting pressure sensors
By pressing the
and
buttons the DIGIMON pressure displays are
reset to zero, in order to avoid incorrect measurement values.
To obtain a correct measurement value on the display, the DIGIMON should
not be reset when pressurised or under a vacuum.
Factory settings
Set the DIGIMON to the "
Digital display"
screen.
Press the
and
buttons at the same time for 5 seconds.
Display shows
- - - - - - - -
Press the
button to exit.
Resetting the external vacuum sensor
Switch off the DIGIMON
Connect vacuum sensor
Hold down the
button and switch on the device using the
button.
Display shows
VAC-ZERO
Press the
button to exit display shows
End.
The device can be switched on using the
button and is ready for
operation once again.
ON/OFF
SET
ON/OFF
VAC
SET
VAC
LIGHT
LIGHT
SET
