www.reer.it
8540715 Rev.2
5/8
FMC-B / FMC-BR
COLUMN FOR ADMIRAL/VISION/JANUS LIGHT CURTAINS
GENERAL
These mounting instructions contain information about:
The correct mounting of the light curtains
ADMIRAL, VISION
and
JANUS
inside the
FMC
or
FMC-BR
columns.
The assembly of the
FMC
or
FMC-BR
stand for mounting on the
FMC-CB/FMC-CBL
stand bottom.
The correct mounting of emitters and receives (with our without mirror).
Please find detailed information about the function of the light curtains / light grids in the relevant
mounting and wiring instructions.
MOUNTING ON THE FMC-CB/FMC-CBL STAND BOTTOM (Fig. 1)
Mount the
FMC-CB/FMC-CBL
stand bottom on the floor (see mounting instruction for stand bottom).
Please note:
For a correct alignment, please verify that the stand bottom upper surface is even and
horizontal (using a circular spirit level.)
To operate the regulation, act on the three hexagonal nuts B (fig.4) until the perfect
levelness is reached. (Maximum adjustment: 10mm).
If the ground roughness is over 10mm, flush it adequately.
Loosen the three allen screws and remove the washers.
Assembly the column to the stand bottom, centering the FMC-B column rotation flange with the guides of
the
FMC-CB/FMC-CBL
stand bottom upper plate.
Fix the column tightening the three allen screws and the washers.
Figure 1
