10. On/off button
11. Increase/decrease microphone sensitivity
12. Power indicator
13. Night light VOX indicator
14. Night light switch
15. Transmission indicator
16. Microphone
17. Night light
18. Micro USB slot for power supply
19. Speaker
Before first use
1. Make sure to fully charge the battery of the parent unit before using it for the first time until the power indicator (3) lights up green continuously. The power indicator
lights up red during the charging process. In the event that the built-in battery is defective, it can be replaced by opening the battery compartment cover on the back.
2. Connect the baby unit with the supplied mains adapter. As an alternative, the baby unit can be operated with 3x AAA alkaline batteries or rechargeable batteries. For
this purpose, open the battery compartment cover on the back and insert the batteries. Make sure that the polarity is correct when inserting the batteries and do not
mix alkaline batteries with rechargeable batteries. Please note that inserted rechargeable batteries are not charged in mains operation.
3. Switch on the parent unit with the On/Off button (1). The power indicator (3) lights up green.
4. Switch on the baby unit with the On/Off button (10). The power indicator (12) lights up green.
5. The devices, which are pre-coupled at the factory, will now transmit the sound signal as soon as the baby unit detects any sounds. Should you encounter problems with
the transmission, please proceed as described under
Pairing
.
Description of the units
Parent unit / Receiver
Baby unit / Transmitter
1. On/off button
2. Increase/decrease volume
3. Power indicator
4. Vibration indicator
5. Noise level indicator
6. Microphone
7. Speaker
8. Talk button
9. Micro USB slot for power supply
3
