English (
GB)
05. Noise level indicator
The four LEDs (02) above the display illuminate sequential-
ly from green to red, depending on the volume level of the
sounds being received.
06. Range control:
If the parents’ unit is not receiving a signal from the baby’s unit, the parents’ unit will emit a peeping
sound and “NO SIGNAL” will appear on the display.
07. Room temperature alarm
If the baby’s unit measures a room temperature above 37.2°C or 100°F, it will emit a peeping sound
and the temperature indicator will begin to blink.
Baby’s unit temperature settings: Select °C or °F on the
switch located under the battery pack in the battery
compartment.
Volume level in the parents’ unit’s display.
You can choose between 5 volume levels.
Indicates the battery level for the parents’ unit.
Transmission strength between baby’s unit and parents’ unit
Indicates that there is no reception between parents’ unit
and baby’s unit.
Other functions for the parents’ unit:
page 17
TIP:
For best transmission, always
place the unit in its upright
position.
K ART NO. INT063 SIZE:148 * 210 mm 13/12/2010
