REENTEL Cabking-6v3, Instruction Manual

Page: 11 / 16

11
Water System —One of the key features to the CABKING-6V3 is the single pass, con-
tamination free water system. All parts of the water system will remain trouble free as
long as you use a fresh, clean supply of water. Do this by using a separate intake wa-
ter bucket from the drainage bucket. Most importantly, a fresh supply of water will pro-
tect you from cross-contamination of grit which can occur in re-circulating systems that
use a bubbler or geyser. With fresh water the pump and intake tubes will stay clean
and unobstructed so there will be enough water pressure. The pump is rated at
30watts, 605GPH, 8.2ftHmax. We recommend using a minimum 5 gallon bucket for
both the pump and drainage. You will typically go through an average of 1-2 gallons of
water per hour, with the water control knob on a light to medium drip. You want to
monitor the water level in the bucket to make sure the pump is always submerged. The
pump is not designed to run dry, so be vigilant.
All parts of the water system can be disassembled by pulling off or unscrewing, then
cleaned with soapy water. For routine maintenance it is a good idea to clean the noz-
zles, Y-SPLIT, and tubing with a small wire brush or pipe cleaner, like the one supplied.
DO NOT SET UP AS A RE-CIRCULATING SYSTEM , meaning putting the drip pan
tubes into the same bucket of water as your pump. Doing so will void your warranty.
Setting up this way will also mean you will risk cross contamination of grit, resulting in
scratches on your stone. Grit will eventually build up in the water control valve, noz-
zles, and tubing to restrict water flow.
CABKING WATER SYSTEM PARTS
NOZZLE (2pc)
Y-SPLIT
THREADED–T THREADED–L
PARTS AND TUBING CAN BE REMOVED BY EITHER PULLING APART OR UNSCREWING.
CONTACT YOUR DEALER FOR ADDITIONAL PARTS AND TUBING.
TUBING. 1/4”
OUTER DIAMETER
BY 1/8” INNER
DIAMETER
NEEDLE
VALVE