72
b) Further Control Elements of the App
Figure 17
The symbol shown in figure 17, item 5 sets the flight mode (also see chapter 13).
In the basic configuration, the App is set to "30%". This corresponds to beginner's mode. The control functions are
limited in their effects.
If you touch this symbol again, "60%" will appear. This corresponds to advanced mode. The model reacts more agile
to the control commands.
If the symbol is touched again, "100%" appears (see above in figure 17). This corresponds to professional mode. The
control functions are not limited then.
By touching it again, beginner's mode is activated again (display "30%").
Pushing the symbol sown in figure 17, item 8, can make the model do a flip (a 360° turn). For this, put the quadrocop
-
ter into a stable hover flight at an altitude of at least 1.5 metres at sufficient distance from the pilot and any obstacles.
Then touch the symbol shown in figure 17, item 8 again. Then move the right control element forward/back/to the left
or right (one direction only, not diagonally). The model will now flip in that direction. This function works according
to the function on the remote control transmitter. Therefore, observe the notes in chapter 14 as well when using this
function. This function is reset again after the flip. To perform another flip, select the symbol in figure 17, item 8 again.
