manualshive.com logo in svg

Reely 1558909, Operating Instructions Manual, Page: 14 / 28

Share
Download
Reely 1558909 Operating Instructions Manual Download Page 14

14

d) Connecting the Flight Battery

Move the control lever for the pitch and yaw functions (also 

see figure 1, item 9) to the bottom position and switch on 

the  transmitter  with  the  on/off  switch  (also  see  figure  1, 

item 6). 
The transmitter emits two short signals and the transmitter 

LED (also see figure 1, item 1) flashes.
Then connect the plug of the flight battery (1) that is pro

-

tected against polarity reversal to the battery connection 

socket of the quadrocopter (2). 
Right after connecting the battery, the red (3) and blue (4) 

LEDs of the quadrocopter will start to light up briefly and 

will then flash quickly. 

Then put the quadrocopter back in the starting place on a 

level ground.
Move the control lever for the pitch and yaw functions to 

the front position and then back to the bottom position 

again at once. The remote control transmitter then emits 

a signal sound, and the LEDs at the quadrocopter and the 

transmitter LED are permanently lit.

Now your quadrocopter is ready to start.

Figure 7

Summary of Contents for 1558909





























Reviews:

No comments