42
d) Hover Flight
For a simpler and consistent explanation of steering , classic terminology is used here as well. This comes
from flight language and is widely used:
Directional descriptions are always to be interpreted from the perspective of a “virtual” pilot. in the model. The radial
arm with the attached arrow is considered “front”. The explanations are all based on configuration of the remote
control to mode 2.
“Hovering” denotes a flight status in which the QuadroCopter neither rises nor falls so that the upwards directed uplift
force is equal to the downwards directed weight. This is achieved approximately in mid throttle setting (but independ-
ent of a possible payload).
During flight close above the ground and during take-off, turbulence and air flow can be experienced which
may affect the QuadroCopter . A quicker response to the controlling motions and slight swerving of the
QuadroCopter forwards, backwards or to the side may result from this.
e) Yaw
“Yaw” denotes the rotation of the QuadroCopter
around the yaw axis (vertical axis). This movement
either occurs unintentionally due to the speed
torque of the rotors or intentionally as a flight direc-
tion change. For the QuadroCopter , this movement
is not controlled by a tail rotor, but through speed
variation of the individual rotors to each other.
Point (1) indicates “forwards”.
f) Pitch
“Pitch” denotes the movement around the cross
axis which can be compared to the nodding of a
head. Through this, the QuadroCopter gains flight
speed forwards or backwards or decelerates.
Point (1) indicates “forwards”.
Figure 26
Figure 27
Summary of Contents for QuadCopter 650 ARF
