
reedinstruments
www
com
17
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black
Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
Delete Function
In the Menu, you can find following functions:
Delete Current Data
: If you find the last measured reading is wrong,
you can delete it via this function. At the same time,
the statistics will be updated.
Delete All Data
:
You can delete all data and statistics of the Current
Work Mode.
Delete Group Data
: In addition, this function will delete High Alarm, Low
Alarm, and One and Two-point Calibration Values
Meter Control via PC
All measured readings of all work modes can be downloaded to PC via
USB port for data analysis. See software guide for more details.
Trouble Shooting
The following list of error messages explains how to identify and eliminate
faults.
Err1, Err2, Err3
: Connecting of probe fault; Deviant signal
Err1
: Eddy current probe
Err2
: Magnetic induction probe
Err3
: Both probes
Err4, 5, 6:
Reserved
Err7
: Thickness fault
Battery Replacement
1) Place the meter upside down on a suitable surface
2) Remove the screws from the battery compartment with a cross tip
screwdriver
3) Raise the lid of the Battery Compartment
4) Remove battery
5) Insert new battery
6) Close the lid and fasten with screw
www.reedinstruments.com
1-877-849-2127 | [email protected]