2
CAPACITY
• The PLAS0H can cut and bevel plastic pipe up to 12” (335 mm) diameter.
• Take care to check specific model numbers for PVC or PE pipe.
• Blades for PE and PVC can be switched so that one cutter can work for either
type of pipe.
IMPORTANT NOTE
The cutter is equipped with a carbide cut-off tool. For this reason, cutter must be ro-
tated only in the direction indicated by the arrow. The arrow is marked on the cutter
frame. (Figure 3). If cutter is turned backward, carbide tip may be broken.
Figure 3
PLAS0H
PLAS0HPE
Figure 1
Figure 2
PLAS0H Models
Arrow on frame
Figure 4
PLAS0H MODELS
NOMINAL PIPE SIZE
PIVOT LINK/ HOLES
4” (100 mm)
Short/Inner holes
6” (160 mm)
Short/Outer holes
8” (240 mm)
Long/one inner hole, one outer hole
