reedinstruments
www
com
12
Fuse and Battery Replacement
Fuse Replacement
1) The meter is provided with one 5 x 20mm 500mA fuse for current (direct
input) measurements and current range overload protection purposes
2) When the direct input current range isn’t operating check to see if the
fuse is broken
3) To replace the fuse, open the housing case and remove the fuse from
the main PC board
4) Replace the fuse according the specifications and replace the housing
case
Battery Replacement
Caution: Remove test leads before opening the battery cover
1) When the LCD display shows
you will need to replace the battery
2) Loosen the screw on the battery cover by screwdriver and remove the
battery
3) Replace with 9V battery and replace the cover
Notes _________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________