REED B50HPG, Technical Manual, Page: 58 / 235

OPERATION and MAINTENANCE
Rev 1.2 57 of 80
www.reedpumps.com
(909)287-2100
GENERAL MAINTENANCE AREAS
Perform scheduled inspections to identify and detect any potential problems. The list
presented should be inspected and checked on a regular basis and is a recommended
minimum.
TRAILER
•
Frame integrity, visually check welds, cracks
•
Torsion axle secure
•
Wheels and tires, lug nuts tight, tire pressure
•
Electric brakes, breakaway switch connected
•
Front jack stand handle turns easily, smoothly
• Manual jacks slide freely, lock pins in place
• Lighting good condition, operational
ENGINE (refer to engine manufacturer manual)
•
Inspect mounts, bolts, brackets, and belts
•
Oil and coolant fluids at proper level, check for leaks
•
Fuel system, tank mounting, filter condition, leaks, damaged lines
• Battery hold down, condition, tightness of cables
• Key switch, indicator lights
• Throttle control functional
• Air cleaner and muffler securely mounted
PUMP CELL
• Visually check for structural damage, cracked welds
• Hydraulic drive cylinders in good condition, secure, check for leaks
• Material cylinders secure, tie rods tight
•
Water box structurally sound, clean, cover in place
•
S-Tube shift mechanism structurally sound, all pins and retainers in place
•
Hydraulic shift cylinder(s) in good condition
•
Bearing housing, seals etc. in good condition
•
Hydraulic hoses secure no leaks
HOPPER ASSEMBLY
•
Visually check for structural damage, cracked welds
•
S-Tube secure, in good condition
•
Check condition of wear plate, wear ring, seals
•
Check connection of s-tube to outlet, seals, bearing
•
Hopper drain is functional
•
Cleaning hopper
• Zerk fittings accept grease