REED B50HPG, Technical Manual, Page: 37 / 235

OPERATION and MAINTENANCE
Rev 1.2 36 of 80
www.reedpumps.com
(909)287-2100
GASOLINE CONTROLS B-SERIES
1. CONTROL SWITCH
(LOCAL/REMOTE) this is
used to select the pump
control location. Press
toggle to LOCAL to
enable operation of
concrete pump for main
stationary panel. Press
toggle to
REMOTE
for
operation using the
remote control. Led light
will show status.
2. STROKE-SWITCH Press
toggle ( DOWN ) to test
stroke change. It is used
for the purpose of
pressure testing the main
drive cylinders. Both main
and swing cylinders
reverse direction when
toggle is depressed.
When the main cylinders
reach the end of the
stroke they will “dead
head” until the toggle is
released.
3. PUMP ON/OFF SWITCH
this is to turn the pump on
and off. Press toggle
PUMP ON to turn pump
on, and press toggle
PUMP OFF to turn pump
off. Led light will show
status.
4. PUMP DIRECTION
SWITCHES this is used to
select and controls of the
cycle direction of the
concrete pump.
Press
toggle
FORWARD
to
control pump forward, and
press toggle REVERSE to
control pump reverse
functions. Led light will
show status.
5. RPM +/-, press toggle to
control the increase and
decrease of engine RPM .
1
2
3
4
5
NOTE: Hopper grate safety switch engages
EMERGERGENCY STOP when grate is lifted