background image

15

Verify Set Time and Date

During normal operation press the

 

TiME CHECK button to display the 

year, month, day, hour and minutes.

Verify Sampling Rate

During normal operation, press the SAMPLiNG CHECK button to view the 

selected sampling rate.

Data Logging

Data Recording Modes

Manual Data Logging:

 Press the 

LOG

 button to manually log up to 99 

readings on a SD memory card (see 

Manual Data Logging Mode

 for details).

Automatic Data Logging: 

Setup the meter parameters in order to 

automatically log data on a SD memory card. The number of data points 

is limited by the size of the memory card.

Note:

 it is recommended to use a class 4 SDHC memory card between 1Gb 

and 16Gb. insert the SD memory card in the slot at the bottom of the meter. 

The card must be inserted with the label side facing the rear of the meter.

Manual Data Logging Mode

In manual mode, the 

LOG

 button is pressed to manually log a reading on 

the inserted SD card at any time. In order to setup the meter for manual 

data logging, follow steps 1 through 8 below.
1.  Set the data logging sampling rate to "0" seconds (see 

Setting the 

Data Logging Sampling Rate

 section for details).

2.  Press the 

REC

 button and "REC" will appear on the LCD.

3.  The meter will also display P-X (X = memory position number 

between 1 and 99).

4.  Press the 

SET

 button to enter the data memory positions selection.

5.  Press the   and   buttons to select one of the 99 data memory 

positions in which to record.

6.  Press the 

ENTER

 button to confirm selection.

7.  Press the 

LOG

 button to save a reading to memory. "REC" will flash 

each time a data point is stored.

continued...

 

REED Instruments

1-877-849-2127 | [email protected] | www.reedinstruments.com

Summary of Contents for R4000SD























Reviews: