10
Changing the Air Velocity Unit of Measure
To change the air velocity unit of measure, press and hold the
ENTER
button. The display will scroll through each unit (m/S, Km/h, mph, Knot,
& FPM). Release the
ENTER
button to select the displayed unit. The
selected unit will be saved as the new default unit of measure.
Type K/J Thermocouple Measurement Mode
1.
Select the "tP" function (see
Selecting Measurement Modes
for details).
2. Plug the optional Type K or J Thermocouple Probe into the Type K/J
thermocouple input jack.
Note:
Make sure to remove the rotating vane before inserting the
thermocouple probe.
3. The screen will display a "K", confirming that is configured by default
to a Type K thermocouple probe. The measured temperature will now
be displayed as shown below.
Note:
if using a type J thermocouple probe, see
Selecting Thermocouple
Type
for details.
K
continued...
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com