7
www.REEDInstruments.com
AC Voltage Detection
Place the NCV sensor head near the test object or the power socket with
AC voltage. When AC voltage is detected, the red LED in the tip and
audible alarm will turn on.
High/Low Voltage Detection Modes
1. When the detector is powered on the red indicator light on the panel
will light up indicating the default voltage detection range is set to
High (90 to 1000VAC).
2. Press the power button once and the red indicator light will switch to
green indicating the detector is now in Low Voltage Mode
(24 to 1000VAC). In low voltage mode, the detector is more sensitive
to electrical interference/noise. Please only use low voltage mode
during weak electrical field environment.
Magnetic Field Detection Mode
The magnetic field detection function can be used to to quickly determine
if components are working properly (i.e. Solenoid valves, relays,
contactors, permanent magnets, electromagnets, etc.).
To use the magnetic field function, press the power button until the yellow
indicator light on the instrument panel lights up. When a magnetic field is
detected the buzzer will beep and the indicator light will illuminate.
Low Battery Indicator
When the battery voltage is lower than 2.4V, the detector will automatically
turn OFF.
Auto Power Off
The detector will auto power off when it is not used for 5 minutes.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
