background image

3

Product Quality

This product has been manufactured in an ISO9001 facility and has been 
calibrated during the manufacturing process to meet the stated product 
specifications. If a certificate of calibration is required please contact the 
nearest authorized REED distributor or authorized Service Center. Please 
note an additional fee for this service will apply.

Safety

Never attempt to repair or modify your instrument. Dismantling your 
product, other than for the purpose of replacing batteries, may cause 
damage that will not be covered under the manufacturer's warranty. 
Servicing should only be provided by an authorized service center.

Features

• Shore "A" hardness tester designed to measure hardness of rubber,

elastomers, natural rubber products, neoprene, polyester, resin, leather
and soft PVC

• Meets DIN 53505, ASTM D2240, ISO 7619 and JISK 7215
• 4-digit, LCD display
• Pocket-sized model with integrated probe
• Maximum and Average functions
• Zero adjustment button
• Low battery indicator and auto shut off

Included

• Wrist Strap
• Test Block
• Batteries
• Hard Carrying Case

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for 800837000651













Reviews: