page 19 of 19
Plumbers, please ensure a copy of the installation
instructions is left with the end user for future reference
Domaine Semi-Recessed Wall Hung
CARE & MAINTENANCE
If you cannot identify basin, top or cabinet material of your product, contact your merchant or see product information at www.adpaustralia.com.au.
T I P S
•
ADP products are produced from materials that are well suited to the bathroom, however it is important that your bathroom
has sufficient ventilation to avoid excessive moisture. High humidity will lead to permanent dampness and mould, resulting
in deterioration of the materials.
•
Care must always be taken to dry any excessive moisture or water spillage.
C A B I N E T S
•
To maintain the finish on your cabinet use only a soft cloth and weak solution of non abrasive detergent.
•
To remove scratches, marks, etc. on two pack polyurethane, rub gently with car cutting compound, car polish or household
brass/silver cleaner.
•
Goods used in construction are water/moisture-resistant, but not water-proof.
•
All cabinets should be installed at least 300mm away from showers or bathtubs to avoid water damage.
A C R Y L I C T O P S
•
To maintain the finish on your Acrylic top use only a soft cloth and weak solution of non-abrasive detergent.
•
To remove scratches, marks, etc. rub gently with car cutting compound, car polish or household brass/silver cleaner.
C E R A M I C T O P S
•
To maintain the finish on your ceramic top use only a soft cloth and weak solution of non abrasive detergent.
•
Due to the glazed surface of ceramic tops, scratches cannot be repaired or removed.
•
Due to ceramic being a handcrafted product that is fired at high temperatures, some visual distortion may occur. This is not
a defect but can be seen to add to the beauty of the product.
C H E R R Y P I E / F R I D AY H Y B R I D Q U A R T Z
•
Wipe clean with a soft damp cloth or sponge.
•
For basic stains clean with mild detergents. For
gloss and semi-gloss
surfaces you can use a non abrasive polish or Brasso.
For
matte
surface use a scourer pad or scotch bright to maintain the matte finish.
•
Cherry Pie and Friday Hybrid Quartz™ benchtops have excellent heat and chemical resistant properties compared to other
surfacing products, however to preserve the surface and protect against damage from heat, do not place hot items directly
on the surface. Even though Cherry Pie and Friday™ can withstand high temperatures, prolonged periods or extreme heat
can cause permanent damage.
B A M B O O
•
Use a soft dry microfiber cloth and mild detergent. Remove residual detergent with a damp cloth.
•
All spills should be cleaned immediately. Dry the surface with a soft, clean dry cloth to remove all water and to reduce
streaking.
•
A non-abrasive household cleaner may be used.
page 8 of 8