page 15 of 19
Plumbers, please ensure a copy of the installation
instructions is left with the end user for future reference
Domaine Semi-Recessed Wall Hung
7. ADJUST DOORS & DRAWERS
8. CLEANING
Install drawers and doors back onto cabinet and make adjusments to
align the doors and drawers correctly.
NOTE: IT IS THE RESPONSIBILITY OF THE INSTALLER TO MAKE
ANY ADJUSTMENTS TO DOORS AFTER INSTALLATION.
Clean all building residue from the cabinet. Dry any spillage or leakage
of water on or inside the cabinet during installation.
Note:
Ensure drawer runners are free of any debris as this may effect
the operation.
UNIVERSAL PLUG & WASTE INSTALLATION
1)
Remove washers and removable plug (A) & check waste fits in hole.
2)
For ceramic basins - Place thin foam washer (C) in position under rim of Waste Neck (B) & seal in place with a
non-acidic silicone.
For all other basin material types, you do not need foam washer (C) before sealing in place.
3)
Insert into centre of waste hole.
4)
Insert Rubber Washer (D) on top of section (E) and screw on
(hand tight only).
5)
Insert Removable Plug (A) into the Waste Neck (B), ensuring you align the grooves until the waste is seated &
locked into place.
Please Note:
Ensure Rubber Seal (A.2) and O-Ring (A.3) are installed on Removable Plug (A) in order to provide
a watertight seal.
IMPORTANT
Avoid overtightening
waste to prevent stress &
damage to the basin or top
HAND TIGHTEN ONLY
Must be sealed with
NON-ACIDIC
silicone sealant
TO INSTALL
Note: All plumbing components must be installed by a licensed plumber.
B
A.
C
D
E
A.2
Rubber Seal
Waste Neck
Thin Foam Washer
Thick Rubber Washer
Threaded Connector (40mm)
A.3
O-Ring
Removable Plug
Simply align & insert
It’s that easy!
Ensure Rubber Seal & O-Ring
are in position on removable plug.
A.3 O-Ring
A.2 Rubber Seal
page 4 of 8
