Tall Boy Fitting Instructions
• Prior to installation it is important to inspect the Z8 Tall Boy to ensure no damage has occurred in transit. If damage has occurred, or a
visible defect exists, DO NOT proceed with installation and advise supplier immediately. No warranty claim for damage will be accepted
if the Cabinet is installed. This includes scratches to the glass.
• It is recommended that the mirror is protected during installation.
Please Note: Manufacturer will not be liable for the cost of installation or removal of the mirror and the warranty will be voided if
damage occurred during or after installation.
•
If installing in combination with other ISSY by Zuster units, Install the Z8 Tall boy first.
•
Attach corian support where the corian will rest if installing with an extended top vanity.
(Recommended vanity height 760mm)
•
This unit is freestanding, however it is STRONGLY RECOMENDED to be fixed to the wall for safety. To do
this, screw through any part of the back of the unit into the wall, ensuring contact to studs. If not fixing
to studded wall, installer must ensure appropriate fixing to provide sufficient support.
INSTALLATION INSTRUCTIONS
Tall Boy should be installed by a qualified, licensed trades person.
ISSY //
Z8 BUTTERFLY TALLBOY
page 7 of 8
