6
1.
Identify the Rear Stabilizer (14), which has a
Leveling Foot (63) near each end.
Attach the Rear Stabilizer (14) to the Frame (1)
with two M10 x 75mm Screws (36).
2. Attach the Front Stabilizer (2) to the Frame (1)
with two M10 x 75mm Screws (36).
1
To make assembly easier, read the
information on page 5 before you begin.
3. Orient the Upright (3) and the Top Shield (9) as
shown.
Have a second person hold the Upright (3) and
the Top Shield (9) near the Frame (1) until you
complete step 4.
Connect the Upper Wire (32) to the Lower Wire
(31). Then, pull the excess Upper Wire out of
the top of the Upright.
3
36
63
63
36
9
1
31
32
14
1
1
2
3
2
