Fusion TREADMILL
5
HARDWARE COMPARISON CHART
Hardware Pack
:
The hardware fitting and tools required for assembly are packed in a bag with in the main carton. These are referenced by a
numerical code as outlined in the parts
list (page 6). The pack configuration is shown below in order to ease identification.
Please open the bag carefully and place them
on a piece of card, as below, to easily identify the parts before assembly.
NOTE
: We suggest that you do not open the hardware pack until you are ready to assemble your FUSION TREADMILL .
When you open the pack, please do so carefully to ensure that the pieces remain in their position by their identification
numbers.
NO.
DESCRIPTION
QTY.
805
M8
×
43
mm
Bolt
4
806
∮
8 Washer
8
830
M8x18 Allen head cap screw
4
107
Safety Key
1
A
Allen Wrench
1
B
Power Cord
1
C
Lock Pin
1
B
C
MILIMETERS
