06
Mounting the rear camera
Mounting the rear camera
3. Snake the cable
Use a trim removal tool to pop
out tailgate trim, then run the
cable from outside of the car
into the trunk of your car.
4. Connect the rear cameras
power cable to the extension
cable. After snaking your rear
camera's extension cable,
connect the power cable to
your rear camera's extension
cord.
If you need to install a
trigger cable to activate the
reversing guidelines, please
find the positive cable o
f
the reversing lamp or ask a
professional for help
.
1. After testing, our 3M glue is suf
ficient to suppo
rt
the weight of our rear camera.
2. We suggest to install outside the car, the effect
inside the car is far worse than outside the car.
3. If your car is a RV or a pickup truck, you can install
the rear camera forward (the bracket is below),
and turn on the "Upside down of rear camera" and
turn off the "Rear Cam" Mirror Image" to adjust the
image.If you need a license plate bracket, we also
provide this accessory, feel free to CONTACT US.
