16
• Push down on the rear central section
of the slide switch to release the switch
and turn the motor ‘OFF’. The switch will
automatically return to the ‘OFF’ position
• The speed control dial
(Fig. 15)
is located
forward of the ‘ON/OFF’ switch. Rotate this
control dial to alter the speed of the motor.
• The LED Light
(Fig. 16)
. The ‘ON/OFF’
Rocker switch is located on the body of
the light, underneath and to the rear.
This Light will illuminate the immediate
area being worked upon.
• A ring located just to the front edge
of the integral protection stand can be
rotated slightly.
• Rotating this ring will reveal an air bleed
port.
(Fig. 17)
• Revealing this air bleed port in part or
in full, allows the operator to adjust
the airflow from the Sanding Head to a
connected dust extraction machine.
• The operator should adjust this control to
give the most effective dust extraction
from the Sanding Head.
WARNING:
Even with an effective dust
extraction/collecting machine attached to
this machine the operator should still employ
all relevant PPE procedures and processes.
If working ‘on site’ consult the person
responsible for Health & Safety on the site
for extra guidance.
OPERATIONAL GUIDANCE AND ADVICE
GB
Body and Hand Positioning
• This machine is a two (2) handed machine.
Soft grip hand hold areas are provided
along the machine.
• An auxiliary ‘D’ handle is provided and is
particularly useful when the machine is
configured in Long Reach Mode.
• Position your hands along the machine to
provide the best and most comfortable
combination of ‘reach’ and ‘leverage’ for
the particular operation being undertaken.
• Keep your hands away from the swivelling
Sanding Head.
• Do not stretch or overbalance. Reposition
yourself so that you do not have to stretch.
www.leroymerlin.fr
Fig. 16
Fig. 15
Fig. 17
