29
needs and your profile very honestly with your dealer. Take these choices seriously and understand that
you are responsible for the changes. A useful slogan to discuss with your dealer if you contemplate
changing components is
“Strong,
Light, Cheap
–
pick
two.”
Original Equipment components water Scooter surf and component manufacturers test the fatigue life of
the components that are original equipment on your Scooter surf. This means that they have met test
criteria and have reasonable fatigue life. It does not mean that the original components will last forever.
They will not.
18. REPAIR A PUNCTURE:
1.
Deflate the board and try to clean the hole to ensure there is no sand and other contamination.
2.
To brush the PVC glue on both the area around the hole and the patch (PVC material) from the repair kit.
3.
Wait for the glue to be dry, and this is very important. It takes several minutes to dry.
1.
Then cover the PVC to the hole evenly and smoothly.
2.
Find the hot blower to heat the glued PVC patch (not need high temperature), and then press the area with a
small flat board to press the air out and make the PVC glue completely.
Leave the board there for 8 hours, then it will be OK.