USER MANUAL
14
CAUTION:
The correct clamping force on the fasteners (nuts, bolts, screws) in this product is
important. Too little force and the clip may not hold firmly. Too much force and fixing can peel, stretch,
warp or break. In either case, the incorrect clamping force can cause component failure, which can
lead to loss of control and a fall.
Make sure nothing is loose. Do a visual and tactile inspection of this product.
5.3.1
Seat post with the same
: If the seat post has an eccentric cam-lock for easy height
adjustment, check that it is properly adjusted and in the locked position. The saddle must be
in a completely flat position (with respect to the table).
5.3.2
Handlebar Alignment Stem and Saddle:
make sure the saddle and handlebar stem are
parallel to the centerline and tight enough that they cannot be twisted. That the rudder and
handlebars are completely perpendicular to the center line of the board.
5.3.3
Sleeves:
Use alcohol to mount them on the ends of the handlebars. Make sure that these
handlebar grips are secure and well-positioned until the bottom of the end.
5.3.4
5.3.4 Pedals and cranks:
IMPORTANT:
Make sure the pedals and cranks are tight enough and mounted
on the correct side (R:
Right
L:
Left
)
Tight
very strong
the two bolts that attach the cranks to the driveshaft and pre-check it on the
first two or three rides to firmly consolidate and stabilize the correct function (especially on the
first rides).
CAUTION
:
Loose or damaged components of this product can cause you to lose control and fall. They
should not go out and must be replaced if they are damaged or in poor condition. Check them
regularly. Misplaced items can be damaged and cause injury.
5.4.
Safety:
When beginning your first familiarization with this aquatic product, be sure to choose a sheltered
and controlled environment away from boats, swimmers, other aquatic cyclists, obstacles, or other
hazards. Familiarize yourself with the balance, features, and performance of this product. Make the
necessary adjustments always out of the water.
Check the behavior and reaction of this product, and check comfort. If you have any questions or
if you feel that this product does not meet your expectations, please consult your dealer before
proceeding.
6.
ELEMENTS DESCRIPTION:
Consult the two documents delivered:
•
Packing List
•
ASSEMBLY and UNPACKING INSTRUCTIONS BIKE surf (ENG)
7.
ASSEMBLY:
