BACK PANEL
(from left to right)
•
LOOP FX: Stereo fx loop placed between the I.R. and the final outputs. Connect your
favorite outboard effevts like delays, reverbs, etc. here.
•
TO SPEAKER: this is the "through" jack for if you want to use a real cabinet. When the TO
SPEAKER output is used, the internal load is bypassed, the amplifier will see only the real
connected cabinet as the load. Be sure to match the impedance of the amplifier with
your cabinet
•
LINE OUT: the line level signal coming from the reactive load, without the I.R. processing
applied.
•
LINE OUT LEVEL: the volume control of the line out.
•
FROM AMP OUT: this is where you must connect the output of your amplifier.
•
MIDI INPUT/THRU: Midi input and thru ports for midi connection. Switch between the I.R.
by sending Midi CC's to the Amp Central.
•
USB: connect to your PC/MAC for uploading your own favorite I.R.'s.
•
DC IN: use the supplied power supply, or be sure to use one rated at 9 to 12V negative
center and at least with a current output of 300mA.
Summary of Contents for AMP CENTRAL
Page 1: ...AMP CENTRAL Reactive load I R Loader Version 1 0 August 2021...
Page 2: ......
Page 15: ......
