USB and HOW TO CONNECT THE AMP CENTRAL TO PC/MAC
You can connect the Amp Central to your PC/MAC with a USB cable, to upload new I.R.'s by
following the next steps:
•
Power off the Amp Central by unplugging the power connector on the back of the unit;
•
Connect a USB cable to the AMP CENTRAL first and then your PC/MAC after.
•
The Amp Central will automatically be recognized as an external device (like your
memory stick or hard drive for example) with the name AMPCENTRAL;
•
Double click on it, and you’ll see folders with names from 0 to 3. By clicking on each
folder, you’ll find four more folders, each one with an I.R. inside. This means a total of 16
files/folders are available, divided into four banks with four cabinets in each bank.
Let’s take a look this chart to visualize it in a very simple way:
BANK 1
CABINET 1
CABINET 2
CABINET 3
CABINET 4
BANK 2
CABINET 1
CABINET 2
CABINET 3
CABINET 4
BANK 3
CABINET 1
CABINET 2
CABINET 3
CABINET 4
BANK 4
CABINET 1
CABINET 2
CABINET 3
CABINET 4
Summary of Contents for AMP CENTRAL
Page 1: ...AMP CENTRAL Reactive load I R Loader Version 1 0 August 2021...
Page 2: ......
Page 15: ......
