RedSeven Amplification AMP CENTRAL, Manual

Page: 5 / 15

*An Impulse Response is in layman's terms an equalization, or a “snapshot” of your favorite mic’ed
cabinet, to be applied to the raw sound coming out of your loaded amplifier. T in return act as the
complete sound (amp + c mic) as you should hear from your studio monitors, or headphones.
FIRST USAGE
We think it’s better to start slow and to understand the workings of the Amp Central before
diving in and trying the unit.
What you need to know to proceed in the safest way, is to consider the Amp Central as a
normal guitar cabinet.
AMP CENTRAL HAS AN INTERNAL LOAD
RATED UP TO 100W @ 8 OHM.
USE THE 8 ohm tap OUTPUT OF YOUR
AMPLIFIER TO CONNECT IT TO THE AMP
CENTRAL.
Hit the standby switch of your amplifier
ONLY AFTER PLUGGING A CABLE FROM THE
OUTPUT OF YOUR AMPLIFIER TO “FROM AMP OUT” of the Amp Central.
!!!! Do not attempt to connect your amplifier to the Amp Central in other "fancy" ways, your
amp’s life is important! We are not responsible for any improper usage that could potentially
lead to damage !!!!