Redrover True3Di SDM-190M, User Manual

Page: 42 / 44

True3Di USER GUIDE
42
1. No image is shown on the screen after the computer is turned on.
1) When the graphics card is inserted loosely into the card slot on the motherboard,
take out the graphics card from the slot to check if it is clean and re-insert it
tightly.
2) When the memory is inserted loosely into the memory slot on the motherboard,
take out the memory from the slot to check if it is clean and re-insert it tightly.
3) When the monitor cables are faulty with broken pins or got is disconnected inside,
change them to other working ones or new ones.
2. Screen flickers after 3D images are being played.
1) When the monitor display mode is set to “Single view mode”, change it to “Clone
view mode”.
3. Left and right images on one screen.
1) When a media player program is being used, turn off other media player programs.
4. No 3D stereoscopic images after the computer starts normally.
1) When the keyboard plug is inserted loosely into the keyboard slot, take out the
keyboard plug from the slot to check if it is clean and re-insert it tightly.
2) When only one screen or both screens do not show any images, check if the
power is turned on.
5. No 3D stereoscopic images without any problem with setting.
1) When no 3D stereoscopic images appear without any problems with the options,
please reinstall the driver.
Reinstallation process
Restart the computer with safe mode. Uninstall the Nvidia driver. Remove the
Nvidia folder (C:\NVIDIA\Win2kxp\). Reinstall the Nvidia driver and stereo driver.
Trouble Shooting