Redrover True3Di SDM-190M, User Manual

Page: 26 / 44

True3Di USER GUIDE
26
2) Option Mode
- Press Menu button (④). Then “Picture OSD” shows.
- Press up (⑤) and down (⑥) buttons to select “Option Menu”
- Press Enter (⑦) to select “Option Mode”. Then press up (⑤) and down (⑥) buttons
to select desired sub-menu.
- RGB Calibration is set from factory. DO NOT USE THIS MENU.
- Select “Factory Reset” only when Input source is selectable from the menu.
- H-Flip is set for Auto as default. When using a Mirror mode, change its value to
“Manual” by pressing Enter (⑦) to enable.
- Test pattern may not be selectable.
3) Input Source Mode
- Press Input (③) to choose input source. Then press up (⑤) and down (⑥) buttons to
select desired input source.
- Component may not be selectable.
- Press “Factory reset” from “Option mode” when “Input Source” is not
selectable.